Reduce wheel loss from loose nuts with the Squirrel® Wheel Safety Device. An easily fitted device that brings peace of mind for drivers. Will suit 8 - 10 stud wheels (US Version) and 10 stud wheels for (UK Version). Manufactured in Australia from U.V. resistant nylon.
Speak to your local Silverback sales representative about the Squirrel® Wheel Safety Device on 1300 858 858.
The Truckers Trident Pallet Angle Placement Tool is designed to enable Pallet Angles to be placed on high loads without the need to climb onto the back of the truck.
Speak to your local Silverback sales representative about the Truckers Trident Pallet Angle Placement Tool on 1300 858 858.
These straps are 50mm wide with a length of 9m, rated to 3000kg load capacity and fitted with 2 x Silverback branded protective sleeves. These straps are the industry standard for securing general freight of all types.
Speak to your local Silverback sales representative about the 9m x 50mm, Winch Strap with Hook & Keeper, LC 3000kg on 1300 858 858.
The Tire Skate is a useful and economical tool to load and unload vehicles with locked or severely damaged wheels on and off a flatbed tilt tray tow truck. Made from recycled plastic, environmentally friendly, lightweight and easy to use. Oil and grease resistant, will not rot. The compression and shear strength is greater than wood.
Speak to your local Silverback sales representative about the Tire Skate on 1300 858 858.
The Truckers Trident Chain Knuckle Placement Tool is designed to enable Chain Knuckles to be placed on high loads without the need to climb onto the back of the truck. With an extended length of 1.85m it can be used by an average height adult to place a Chain Knuckle on top of loads 3.5 - 4m high.
The Load Height Measuring Pole is a vital safety device in compliance with the latest Heavy Vehicle National Law (HVNL) and Chain of Responsibility (CoR) rules, to ensure maximum load heights are not exceeded for intended travel routes.
Speak to your local Silverback sales representative about the Load Height Measuring Pole on 1300 858 858.
Sequentially Numbered Tamper Evident Tape. Perforated into 344 sections of 145mm and supplied in rolls of 50 metres. This allows the user to use the tape as a continuous tape or use individually perforated sections.
This tape is considered ‘Non-Transfer’ meaning the hidden message will not transfer to the applied surface after tape removal and the applied surface remains clean. Only the tape itself will display the hidden “VOID” message on removal.
The Phoenix Cordless Bolt Seal Cutter takes away the risk of strain injuries when using traditional heavy manual bolt cutters and also potential for eye injuries often caused by projectile seal parts during cutting.
