Reduce wheel loss from loose nuts with the SQUIRREL Wheel Safety Device

Fitting Instructions

Prior to fitting the Squirrel® ensure wheel, studs and nuts are free from damage and correctly tensioned as per manufacturers specifications.

• Weave the Squirrel® under and over alternate wheel nuts, starting at the bottom of the wheel and working towards the top.
• Stretch the Squirrel® over the last wheel nut. Considerable force is required during this operation. A screwdriver may be used to assist in levering the Squirrel® into place.
• Push the Squirrel® towards the back of each nut to ensure it is securely fitted.
• Visually check that the Squirrel® is correctly located on the wheel nuts and not sitting on any exposed stud.

The Squirrel® is intended to compliment and not replace manufacturers recommended re-tensioning and maintenance procedures.