|
Silverback |
|---|
Rigid Delineators 300x300mm are required to transport oversize loads at night
50mm Strap/ Chain gap across the back to secure delineator all delineator are made to last in the tuff environment and are covered reflective material.
Compliant the NVHR Code 7.2.1 which states: If a load projects more than 150mm beyond a side of a heavy vehicle, and the projection is less than 500mm thick from top to bottom: 2 delineators must be attached to the projection on each side of the vehicle on which the load projects more than 150mm. at least 1 delineator must be attached to the front of the projection and at least 1 delineator must be attached to the rear of the projection. a delineator attached to the front of the projection must be attached so that its reflective surface is facing forward of the vehicle. a delineator attached to the rear of the projection must be attached so that its reflective surface is facing rearward from the vehicle.
